UNIDENTIFIED

LTI-001C

  Data bus:                  16-bit ISA

  Size:                      Half length, half-height card

  Hard drive supported:      Two IDE(AT) interface drives

  Floppy drives supported:   360KB, 720KB, 1.2MB, 1.44MB

[Image]

                               CONNECTIONS

                    Function                             Location

  40-pin IDE(AT) interface connector                        J1

  34-pin control cable connector - floppy drive             J2

  4-pin connector - drive active LED                       JP1

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

  »   IDE interface direct interrupt          JP2            pins 2 & 3
      select                                                   closed

      IDE interface active interrupt          JP2            pins 1 & 2
      select                                                   closed

  »   Normal I/O speed enabled                JP3               open

      High I/O speed enabled                  JP3              closed

  »   Floppy drive interface enabled          JP4              closed

      Floppy drive interface                  JP4               open
      disabled